SGS Approved Inorganic Polymer Flocculant Wastewater Purifying Chemicals

SGS approved Polyaluminium Chloride PAC-02 yellow powder for potable water treatment

PAC-02 Polyaluminium Chloride is used for drinking water and wastewater treatment.
 

PAC Product introduction:

This product is a kind of inorganic polymer flocculant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridges, sediment trap etc mechanism function, make edema subtle aerosols and colloidal ions off firm, gathered, flocculation, coagulation, precipitation to purify the treatment effect.

Polyaluminium chloride Features:
1) Spray dryer type
2) Used for drinking water treatment and wastewater treatment.
3) Appearance: Solid powder, yellow
 

PAC Specification:

Polyaluminum Chloride Packing&Storage:
25kg/PP woven bag with inner plastic bag
The product shall be sealed and stored in the dry and ventilated place to prevent it from rain,high temperature and strong sunlight .The shelf life of product is 24 months.

Polyaluminium Chloride Advantages:
1. Its purifying effect on low-temperature, low-turbidity and heavily organic-polluted raw water is much better than other organic flocculant, furthermore, the treatment cost is lowered by 20%-80%.
2. It can lead to quick formation of folc (epecially at low temperature) with big size and rapid precipitation

 service life of cellular filter of sedimentation basin.
3.The dosage is smaller than that of other flocculants, which is better for improving the quality of treated water.
4. It has widerange adaptability to the waters at different temperatures (in the summer and the winter) and

 at different regions (in the south and the north of China).
5. It is suitable for automatic dosing device of alum.
6. It can adapt to a wide range of pH value (59), and can reduce the pH value and basicity after

 processing.
 

PAC
SGS Approved Inorganic Polymer Flocculant Wastewater Purifying Chemicals